A Golden Synapse Practice / Home / Brands / Sentinel Strix
Sentinel Strix

A clearer view
of your assets

Sentinel Strix is an IoT framework that brings asset location, equipment readings and maintenance activity into one view. Start with the assets you need to see clearly, then extend it across your operation, including workforce monitoring on factory floors.

THE PROBLEM

Keep asset records as current as the operation

Equipment can move several times before a paper register or spreadsheet is updated. That makes it difficult for the next shift to know what's available and where to find it.

// 01

Time spent finding equipment

When tools move between sites or shifts without a record, staff can spend valuable working time searching for them.

// 02

Gaps in movement history

An audit needs to establish who moved an asset, when it moved and its condition. An outdated register leaves those questions unanswered.

// 03

Equipment sitting unused

Without usage information, it's easy to overlook idle vehicles and tools when planning purchases or allocating resources.

// 04

Repeated reconciliation

Asset counts become outdated as equipment moves, leaving teams to reconcile records again before each audit.

Find the issue before it becomes the next breakdown

A fault found late leaves little time to respond. Calendar-based maintenance can miss changes in condition, while manual reports make it hard to see recurring problems. Sentinel Strix connects asset readings to rules, alerts and maintenance workflows, so teams can follow an issue from the first signal through to closure.

HOW IT WORKS

Tracking technology
matched to your assets

Different assets need different tracking methods. We combine UHF RFID, BLE and GPS as appropriate, bringing their readings into a dashboard your team can use on site.

UHF RFID · 6–12m range
BLE beacons · 1–30m, indoor
GPS · global, mobile assets
Cloud event pipeline · low-latency
Dashboard & alerts · web + mobile
// LAYER 01 · IDENTIFY

UHF RFID

Read dozens of passive tags per second to identify assets passing through warehouses, gates and checkpoints.

EPC Gen 2 · 6–12m
// LAYER 02 · LOCATE

BLE Beacons

Locate equipment within indoor zones using low-power beacons, with the option to associate assets with the people carrying them.

BLE 5.0 · 1–30m
// LAYER 03 · TRACK

GPS & Telematics

Follow vehicles, machinery and assets in transit, including their speed, time spent idle and movements across geofences.

GNSS · global
// LAYER 04 · PROCESS

Cloud Event Pipeline

Process incoming readings and retain a record of asset movements and changes in condition.

Kafka · <500ms
// LAYER 05 · SURFACE

Dashboard & Alerts

Review assets across sites and receive alerts for boundary crossings, idle time, missing equipment and upcoming maintenance.

Web + Mobile

Connect the readings that matter

Sensors and equipment interfaces capture what is happening at the asset. IoT gateways collect those readings and send them over the available cellular or Wi-Fi connection. The cloud platform stores the data, applies rules and makes it available through web and mobile views, with alerts when attention is needed.

  1. Sensors and equipment
  2. IoT gateway
  3. SIM and connectivity
  4. Cloud platform and rules
  5. Web and mobile
  6. Alerts

Work with your equipment’s interfaces

Connect through RS232, RS485, CAN, Bluetooth, UART or Wiegand, according to the device and the data required. We assess the interface, gateway and sensor requirements as part of the deployment.

RS232RS485CANBluetoothUARTWiegand

Add sensors where visibility is missing

Capture temperature and humidity, vibration, current and power, pressure and flow, fuel level, door state, presence and identification. Choose the readings that help your team understand condition, use or a specific operating risk.

Temperature and humidityVibrationCurrent and powerPressure and flowFuel levelDoor, presence and ID
WHAT YOU GET

Your Sentinel Strix deployment

The following capabilities are included as standard in a Sentinel Strix rollout.

UHF RFID Tracking
Identify passive tags in bulk at warehouses, gates and checkpoints.
EPC Gen 2
BLE Proximity
Locate assets within indoor zones and associate them with staff where needed.
BLE 5.0
GPS & Telematics
Review vehicle and mobile asset locations, speed, routes and idle time.
GNSS
Activity Logging
Retain events for movements, check-ins, check-outs, condition changes and maintenance triggers.
Event-sourced
Operations Dashboard
Give site teams a shared view of assets across locations.
Web + Mobile
Alerts & Exceptions
Receive geofence, idle, missing-asset, fault and maintenance alerts through dashboard notifications, email, SMS, WhatsApp, mobile push or webhooks, as configured for your site. L1, L2 and L3 escalation routes pass unresolved events to the next responsible person within the agreed time.
EmailSMSWhatsAppPushWebhook
ERP / HRMS Integration
Exchange asset and movement records with ERP or VAQT HRM as the workflow requires.
REST APIWebhooks

Give each reading a useful context

Vitals condition readingsUtilization run-hours, cycles and loadLocation movement and geofencesEvents faults, doors and power lossIdentity operator, site and cost centre
MONITORING AND MAINTENANCE

See a change in condition and follow it through

Review normal, warning and critical states against the operating limits set for each asset. Use rules, asset health scores and history to identify what needs attention and understand whether a problem is new or recurring. Trends give technicians the readings behind the status, so they can investigate the cause and decide the next step.

From a signal to completed maintenance

Connect monitoring to preventive and corrective maintenance. Use condition, runtime and service history alongside scheduled work, and keep the response visible from detection to closure.

  1. 01

    Detect

    Identify a fault, threshold breach or service requirement.

  2. 02

    Raise

    Create the maintenance event or work order with the relevant asset readings.

  3. 03

    Assign

    Route the work to the responsible technician or service team.

  4. 04

    Attend

    Record the visit, findings and work carried out.

  5. 05

    Close

    Capture the outcome and supporting evidence in the asset’s service history.

The right view for each role

Management can follow asset performance, utilization and maintenance across sites. Supervisors can review active issues and coordinate the response. Technicians can see the asset, the readings and the work assigned to them.

WORKFORCE MONITORING

Bring your workforce into the picture

Sentinel Strix extends factory monitoring to the people working on the floor. BLE helmet tags or armbands, beacons and gateways bring workforce location into the same software you use to monitor machinery.

View detected locations against your factory blueprint and follow movement across production bays and work areas. See where a worker is assigned, which machine they work with and the events that need a supervisor’s attention.

Your floor plan, with people and machine data in view.

Know when an event needs attention

Restricted access and escalations

Identify entry into restricted areas and notify the responsible supervisor. Escalate events that remain unacknowledged according to your site’s response rules.

Movement irregularities

Spot unexpected zone changes, repeated departures or unusually long stays. Review the movement history to understand what happened.

Productivity loss

See where productive hours are lost to repeated or extended time away from assigned work. Check the pattern against approved breaks, reassignments and machine downtime before acting on it.

Understand activity alongside the machine

A worker stepping away from a running machine and a worker waiting through a breakdown are different situations. Review workforce activity alongside connected machine status and maintenance events, with the context needed to decide what warrants a closer look.

Workforce monitoring is configured for each site. You decide which zones are monitored, who can see location history and how long it is kept, so workers can be told what is recorded and why.

SECTORS

Asset tracking across industries

We support teams that need dependable information about equipment location and use.

Manufacturing

Track tooling, fixtures, work in progress and finished goods across production.

Logistics & Warehousing

Follow pallets, containers, vehicles and returnable assets between facilities and gates.

Construction

Locate valuable tools and equipment across construction projects.

Healthcare

Track medical and laboratory equipment with records that support compliance.

Facilities Mgmt

Manage maintenance tools, contractor equipment and facilities assets across sites.

For the equipment your operation depends on

Monitor chillers and HVAC, generators, pumps and water systems, cold rooms, electrical panels and UPS equipment. Extend the same approach to machinery, tools, fleet and other assets, using the connections and sensors each requires.

Chillers and HVACGeneratorsPumps and waterCold roomsPanels and UPSFleet and equipment
INTEGRATION

Use asset data in your existing applications

Connect Sentinel Strix with ERP, CAFM or CMMS, building management systems, HR and attendance platforms, and BI tools. REST APIs, webhooks and scheduled exports put asset records into the workflows that need them, from procurement and depreciation in your ERP to employee assignments in VAQT HRM and operational reporting.

VAQT HRM SAP Oracle EBS Custom ERP CAFM / CMMS BMS Power BI Tableau Webhooks
UHF Readers
BLE Gateways
GPS & Telematics
Sensors & Equipment
Sentinel Strix · Event Pipeline
Dashboard
ERP / HRMS
Alerts
LOOKING AHEAD

A foundation for AI-assisted operations

Consistent asset data creates opportunities for more useful analysis and assistance. Depending on the data available and the implementation scope, Sentinel Strix can be extended with the following capabilities.

Anomaly detection

Identify changes from an asset’s usual behaviour, including patterns that need investigation before a configured limit is crossed.

Failure prediction

Use reading and fault history to estimate breakdown risk and support maintenance planning.

Questions in plain language

Let authorised users ask questions such as “Which chillers ran hot last week?” through connected AI assistants.

These capabilities depend on sufficient, reliable asset history and a defined implementation. Their usefulness should be evaluated against the assets and decisions they are intended to support.

DEPLOY

Let’s assess
your site

Start with a practical monitoring need and build from there. Sentinel Strix provides a digital foundation that can extend across asset categories, support maintenance planning and help teams take responsibility for the condition and performance of the equipment they manage.

Our engineers spend a day understanding how your assets move and where visibility is missing. You'll receive a written recommendation covering hardware, timing and a fixed price.